Resources
Information
Company News
Pavement Asset Management
A Fresh New Look At How To Manage Large Portfolios Of Parking Lots The pavement maintenance space is a very unique and niche market within the construction industry that serves the property and facilities who are left to manage and maintain the buildings and property...
read moreWhat Industry Pros Think About the Latest RynoWorx Melter
When RynoWorx released the RY30MK-Pro, it quickly became the talk of the town because of its innovative and ground-breaking features like dual internal burners with fuel regulator and flame-out sensor. The question now is the RY30MK-Pro is as good as it's marketed to...
read moreIs 50 Degrees Really Warm Enough to Sealcoat?
All manufactures of sealcoats have a recommended minimum temperature requirement of 50 degrees. This does not mean you can sealcoat successfully if the temperature is going to reach 50 degrees sometime in the day. This should be the minimum temperature you start sealing and only if you will have several hours of sunshine with the temperature staying above 50 degrees after application.
read moreBuilt to Last: Introducing the AK300-Air Duramax Sealcoat Sprayer
AsphaltKingdom.com has partnered with Able Industries, a leading pavement maintenance equipment manufacture based in Columbus, OH, to design a bulletproof sealcoat sprayer for the mid to pro-level contractor. The spray system, which is designed to fit on a trailer or bed of a 3/4-ton pickup truck, sprays coal tar, asphalt emulsion, latex or acrylic sealers.
read moreIn-place recyclers and the benefits of seamless infrared patching
Maximum financial and environmental benefits can be derived, and more interestingly, compounded by manipulating existing asphalt as little as possible while introducing as few new elements as possible. Recyclers that use 100% of the existing asphalt …
read morePAH Forensic Experts Have Now Evaluated Sediments
ALEXANDRIA, Virginia, December 16, 2013 – Policy makers were provided with flawed environmental modeling results regarding the sources of polycyclic aromatic hydrocarbon compounds (PAHs) in sediments in the City of Austin, Texas and Washington State, according to a case study recently accepted for publication in Integrated Environmental Assessment and Management (IEAM).
read moreThe New Cedarapids CR552 Paver From Bomag
Boasting the largest rubber tire in its class, the BOMAG Cedarapids CR552 mainline paver delivers the power and production required for full-width paving applications such as airports, interstates and state highways, industrial paving projects, and major county road and highway construction.
read moreUS Geological Survey Modeling of PAH Sources Is Flawed, Newly Published Paper Concludes
ALEXANDRIA, Virginia, Nov. 22, 2013– Policy makers have been provided with flawed environmental modeling results regarding the sources of polycyclic aromatic hydrocarbon compounds (PAHs) in urban sediments, according to a paper just accepted by Integrated Environmental Assessment and Management (IEAM).
read moreWhite Hat Bias Documented in 3rd Data Quality Act Request for Correction Filed by Pavement Council
ALEXANDRIA, Virginia, Sept. 30, 2013 – On Sept. 18, PavementCouncil.org submitted its third Data Quality Act (DQA) challenge since May to the U.S. Geological Survey (USGS). The third DQA Request for Correction (RfC) describes in detail the exaggerations and violations of as many risk assessment guidelines as was needed to make it appear that refined tar-based pavement sealers (RTS) are associated with elevated cancer risks.
read moreNeal Mfg Now A Division Of Blastcrete Equipment Co.
ANNISTON, AL—Neal Manufacturing, since 1978 the leading manufacturer of asphalt sealcoating equipment, has partnered with Blastcrete Equipment Co. and has moved its operations to Blastcrete’s 70,000 sq. ft. manufacturing facility…
read moresubscribe
about us
We have worked in the asphalt industry for decades. We want to help you be as successful as you can be, with the tools, articles, videos, and network you need to succeed. Join us!